The jersey banner in digital printing is made of our FlagTex polyester fabric 110 grams / mē. Our material impresses with its good workmanship, a strong tear resistance, the identical slightly glossy coloring and a smooth surface structure. In addition, the fabric is weatherproof and suitable for indoor and outdoor use. With our textile direct printing machines, we are able to reproduce all color values, photos and color gradients brilliantly. The color design takes place in the CMYK process and is applied to the fabric on one side in the textile deflector. The ink used is water-based and therefore environmentally friendly. This is fixed after the order on the textile with about 180 degrees. The printed image on the back is therefore mirrored. The throughput depends on the grammage of the material used. The color image of the back can be said to be nearly identical. The printing width of our systems and thus the seamless production is 310 cm. If larger dimensions are required, a color coordinated seam is added. The selected fabric is also available with the option of flame retardancy. Please select "Jersey" flame retardant "". These meet the requirements of EN 13501-1. It is the European successor to the German DIN 4102-B1. The jersey banner in digital printing is produced in the overlock seam / simple industrial seam without a cut seam. Custom-made products in special colors, sizes or quantities can be produced on request in our in-house textile factory. Please note the corresponding care instructions. Please contact our support for an express production. Please note the corresponding care instructions.